set
Southeast Tractor Parts
Your source for new and used tractor parts
HomeTractor PartsAbout UsContact UsDirectionsBlogFacebookOnline Stores

 

 


HOME

TRACTOR PARTS

ABOUT US

CONTACT US

DIRECTIONS

BLOG

FACEBOOK

ONLINE STORES


Visit our online stores
page for all your ag and industrial parts needs.

Our online stores
feature thousands of different parts for you
to choose from.

Visit our online stores



Member since 1995ntpda
 
 
HOME >> TRACTOR PARTS >> INTERNATIONAL >> ENGINE KITS
 
OVERHAUL KITS for INTERNATIONAL
For INDUSTRIAL APPLICATIONS, call for availability and pricing
InFrame Kits: sleeves and o-rings (when required), pistons, rings, wrist pins and retainers, rod and 
main bearings with thrusts, head gasket set, and oil pan gasket set.
Major Kits: sleeves and o-rings (when required), pistons, rings, wrist pins and retainers, rod and
main bearings with thrusts, full gasket set with front and rear crank seals.
* High Compression Cylinder Kits make engine crank easier.
        October 2012 Prices subject to change without notice
APPLICATION   ENGINE TYPE            KIT PART NUMBER  
Retail
               
Cub, Cub LoBoy, Cub 154 & 184 LoBoy InFrame = RPOK-C60IF154 385.00
C-60 Gas Major = RPOK-C60M154 405.00
2.625" bore * kits contains dome top pistons
Flat Top Pistons may be available at an additional charge
 * Must have Connecting Rod Cast Number
               
A, B, C, Super A, Super C,  [Need to know with or without water pump]
100, 130, 140, 200, 230, 240
Fire Crater Piston            Fire Crater Piston>> InFrame = RPOK-113IF330A 395.00
Major = RPOK-113M330A 405.00
C-113 & C123 gas
3.125" bore
* lower sleeve O.D. of 3.30"
Flat Top Piston                  Flat Top Piston>> InFrame = RPOK-113IF330B 385.00
Major = RPOK-113M330B 405.00
Fire Crater Piston C-113 & C-123 gas InFrame = RPOK-113IF343A 415.00
3.125" bore Major = RPOK-113M343A 425.00
* lower sleeve O.D. of 3.43" ^^ Fire Crater Piston ^^
               
A, B, C, Super A, Super C,  [Need to know with or without water pump]
100, 130, 140, 200, 230, 240 C113 & C123 Gas
3.250" bore
* lower sleeve O.D. of 3.43"
Flat Top Piston InFrame = RPOK-113IF343B 395.00
Fire Crater Pistons NOT avail. for 3.43 lower sleeveOD Major = RPOK-113M343B 405.00
               
C-152 Gas InFrame = RPOK-152IF 480.00
Farmall H 3.437" bore Major = RPOK-152M 495.00
* kit contains fire crater pistons
* Need Rod & Main Bearing Numbers
               
Farmall Super H C-164 gas InFrame = RPOK-164IF 560.00
3.563" bore Major = RPOK-164M 580.00
* kit contains fire crater pistons
*Need Rod & Main Brg Nbrs*
               
Farmall M  C-248 gas
4.00" overbore cyl kits
* These kits contain Fire Crater/Dome Pistons
Eng S/N <278,049 InFrame = RPOK-248IFA 565.00
* Need Rod & Main Bearing Numbers to ID proper kit Major = RPOK-248MA 605.00
Eng S/N >278,049 InFrame = RPOK-248IFB 565.00
* Need Rod & Main Bearing Numbers to ID proper kit Major = RPOK-248MB 605.00
               
Farmall Super M gas C-264 gas InFrame = RPOK-264IF 570.00
4.125" overbore Major = RPOK-264M 595.00
 * kits contains step head pistons, w/ 1.312" wrist pin
               
Farmall MD diesel D-248 diesel CALL FOR PRICING
               
C-169 & C-175 gas InFrame = RPOK-169IF 495.00
300, 350 gas 3.625" bore Major = RPOK-169M 515.00
* kits contains fire crater pistons w/ .875" wrist pin
               
330, 340 gas InFrame = RPOK-135IF330 665.00
Eng S/N <100,500 Major = RPOK-135M330 685.00
C-135 gas
3.25" bore
404, 2404 gas InFrame = RPOK-135IF404 730.00
Eng  S/N >100,500 Major = RPOK-135M404 765.00
               
B275, 354 BD-144 diesel InFrame = RPOK-144DIF 580.00
3.375" bore Major = RPOK-144DM 595.00
               
B275, B414, 354, 364, C-144 Gas InFrame = RPOK-144GIF 580.00
3414, 3444 gas 3.375" bore Major = RPOK-144GM 605.00
               
B414, B434, 364, 384, 424, InFrame = RPOK-154IFB 565.00
444, 2424, 2444, 3414, BD-154 diesel Major = RPOK-154MB 590.00
3444 diesel 3.50" bore
3.996 flange diameter sleeves available only
(4.004 flange diameter sleeves not available)
               
385, 395, 500C, 500E D-155 diesel InFrame = RPOK-155IFHC 605.00
3.875" bore Major = RPOK-155MHC 665.00
High Compression Cylinder Kits
Replacement Cylinder Sleeves have NO relief notch and are shorter than originals
               
400, 450 Gas C-281 gas InFrame = RPOK-281IF 580.00
*Need Rod & Main Brg Nbrs* 4.125" overbore Major = RPOK-281M 595.00
* kits contains fire crater pistons w/ 1.00" wrist pin
               
450 diesel - starts on gas, D-264 diesel N/A
  runs on diesel
               
424, 2424 gas C-146 gas InFrame = RPOK-146IF 875.00
3.375" bore Major = RPOK-146M 910.00
               
444, 504, 2444, 2504 gas C-153 gas InFrame = RPOK-153IF 875.00
3.375" bore Major = RPOK-153M 910.00
               
454, 2400A, 2400B, 2405B, C-157 gas InFrame = RPOK-157IF 850.00
2410B gas 3.375" bore Major = RPOK-157M 885.00
               
454, 464, 484, 485, 495, D-179 diesel InFrame = RPOK-179IFHC 595.00
2400A, 2400B diesel 3.875" bore Major = RPOK-179MHC 620.00
    High Compression Cylinder Kits          
460 gas C-221 gas InFrame = RPOK-221IF460 680.00
3.562" bore Major = RPOK-221M460 695.00
               
460, 606, 3616 diesel D-236 diesel
3.687" bore
Eng S/N 5,611 to 16,620 InFrame = RPOK-236IF460 920.00
* 4.165" sleeve flange diameter Major = RPOK-236M460 995.00
Eng S/N >16,620 InFrame = RPOK-236IF606 960.00
* 3.873" sleeve flange diameter  Major = RPOK-236M606 1,025.00
               
504, 2504, 3514 diesel D-188 diesel
3.687" bore
Eng S/N <12,092 InFrame = RPOK-188IFA 620.00
* 4.165" sleeve flange diameter Major = RPOK-188MA 645.00
Eng S/N >12,092 InFrame = RPOK-188IFB 620.00
* 3.873" sleeve flange diameter  Major = RPOK-188MB 645.00
               
544, 574, 674 gas C-200 gas InFrame = RPOK-200IF 510.00
3.8125" bore Major = RPOK-200M 545.00
               
544, 574, 664, 674, 684, D-239 diesel InFrame = RPOK-239IFHC 700.00
685, 695 diesel 3.875" bore Major = RPOK-239MHC 730.00
               
560, 660, 656, 706 gas C-263 gas
3.562" bore
* kits contains step head pistons InFrame = RPOK-263IF560 625.00
Major = RPOK-263M560 650.00
* kits contains fire crater pistons InFrame = RPOK-263IF 625.00
Major = RPOK-263M 650.00
*Cylinder kits are available for C-263 gas engines that have been converted to C-291.  The Block has to be bored 
to accept these sleeves.  Sleeves will have the same flange dimensions
*3.750 Overbore Cylinder kits are available with sleeve flange diameter of 4.052" and sleeve flange width of .189"
               
560, 6560, 660, 706 diesel D-282 diesel
3.687" bore
Eng S/N <71,777 InFrame = RPOK-282IF560 750.00
* 4.165" sleeve flange diameter  Major = RPOK-282M560 790.00
Eng S/N >71,777 InFrame = RPOK-282IF706 750.00
* 3.873" sleeve flange diameter  Major = RPOK-282M706 790.00
               
584, 585, 595, 2500, D-206 diesel InFrame = RPOK-206IFHC 700.00
2500A, 2500B diesel 3.875" Major = RPOK-206MHC 750.00
Replacement Cylinder Sleeves have NO relief notch and are shorter than originals
               
606 gas C-221 gas InFrame = RPOK-221IF606 810.00
3.562" bore Major = RPOK-221M606 840.00
* kits contains fire crater pistons
               
666, 686, 706, C-291 gas InFrame = RPOK-291IF 720.00
756, 766 gas 3.75" bore Major = RPOK-291M 745.00
* 3.930 Sleeve Flange Dia & 0.104 Sleeve Flange Width
               
666, 686, Hydro 70 & 86 D-312 diesel InFrame = RPOK-312IF 1,395.00
3.875" bore Major = RPOK-312M 1,420.00
               
686, 706, 756, Hydro 86 D-310 diesel InFrame = RPOK-310IFHC 930.00
3.875" bore Major = RPOK-310MHC 990.00
Replacement Cylinder Sleeves have NO relief notch and are shorter than originals
               
784, 785 diesel D-246 diesel InFrame = RPOK-246IF 770.00
3.935" bore Major = RPOK-246M 810.00
               
766, 826, 886 diesel D-360 diesel InFrame = RPOK-360IF 1,040.00
3.875" bore Major = RPOK-360M 1,130.00
               
786, 826, 886, 3088, 3288 D-358 diesel InFrame = RPOK-358IFHC 930.00
3.875" bore Major = RPOK-358MHC 1,000.00
Major Kits come with SINGLE LIP REAR SEAL; Double Lip Rear Seal is OEM item only
               
806, 826, 856 gas C-301 gas InFrame = RPOK-301IF 610.00
3.8125" bore Major = RPOK-301M 650.00
               
806 diesel D-361 diesel InFrame = RPOK-361IF 1,090.00
4.125" bore Major = RPOK-361M 1,140.00
               
D-407 & DT-407 diesel InFrame = RPOK-407IF 1,070.00
856, 1026, 1256 4.321" bore Major = RPOK-407M 1,150.00
* 1.50" wrist pin diameter
               
D-268 diesel InFrame = RPOK-268IF 770.00
884, 885, 895, 995 diesel 3.875" bore Major = RPOK-268M 790.00
               
D-414 InFrame = RPOK-414IF 870.00
966 diesel 4.30" bore Major = RPOK-414M 940.00
               
986, Hydro 100, Hydro 186, D-436 diesel InFrame = RPOK-436IF 870.00
3688 diesel 4.30" bore Major = RPOK-436M 940.00
               
1066, 1086 DT-414 diesel  InFrame = RPOK-414TIF 870.00
4.30" bore Major = RPOK-414TM 940.00
               
1206 diesel DT-361 diesel InFrame = RPOK-361TIF 1,110.00
4.125" bore Major = RPOK-361TM 1,170.00
               
1456 diesel DT-407 diesel InFrame = RPOK-407TIF 1,090.00
4.321" bore Major = RPOK-407TM 1,180.00
* 1.625" diameter wrist pin
               
1466, 1486, 1566, 1586, 3388, DT-436 diesel InFrame = RPOK-436TIF 870.00
3688, 4166, 4186, 5088, 6388 4.30" bore Major = RPOK-436TM 940.00
               
4100, 4156 DT-429 diesel InFrame = RPOK-429TIF NLA
4.50" bore Major = RPOK-429TM NLA
               
Eng S/N <75,000 DT-466 diesel InFrame = RPOK-466TAIF 915.00
4.30" bore Major = RPOK-466TAM 955.00
Eng S/N 76,440 to 532,980 DT-466 diesel InFrame = RPOK-466TBIF 870.00
4.30" bore Major = RPOK-466TBM 940.00
Eng S/N >532,980 DT-466 diesel InFrame = RPOK-466TEIF 960.00
4.30" bore Major = RPOK-466TEM 1,025.00
               

visa   master card   Discover    
ups    usps    truck

| HOME | TRACTOR PARTS | ABOUT US | CONTACT US | DIRECTIONS | BLOG | FACEBOOK | ONLINE STORES |

Phone: 1-888-658-7171 / Fax: 1-843-658-7454 / Email: eric@setractorparts.com
Office Hours: Monday thru Friday from 8:00 am till 5:00 pm Eastern Time
Southeast Tractor Parts 14720 Hwy 151 Jefferson, SC 29718

Copyright © 2012 Southeast Tractor Parts - All rights reserved.
*Brand names , logos and original equipment part numbers are used for identification purposes only and remain the trademarks of their respective owners.