| OVERHAUL KITS for MASSEY FERGUSON | ||||||||||
| 10/08 Prices subject to change without notice | ||||||||||
| InFrame Kits: sleeves and o-rings (when required), pistons, rings, wrist pins and retainers, rod and | ||||||||||
| main bearings with thrusts, head gasket set, and oil pan gasket set. | ||||||||||
| Major Kits: sleeves and o-rings (when required), pistons, rings, wrist pins and retainers, rod and | ||||||||||
| main bearings with thrusts, full gasket set with front and rear crank seals. | ||||||||||
| Premium Kits: sleeves and o-rings (when required), pistons, rings, wrist pins and retainers, rod and | ||||||||||
| main bearings with thrusts, full gasket set with front and rear crank seals, wrist pin bushings, | ||||||||||
| cam bearings, intake and exhaust valves, valve guides (when required), valve springs, and valve keepers. | ||||||||||
| APPLICATION | ENGINE TYPE | KIT PART NUMBER | ||||||||
| Retail | ||||||||||
| Pony | N62 gas | InFrame = | HOK-CONT62IF | 526.00 | ||||||
| 2.375" bore | Major = | HOK-CONT62M | 500.00 | |||||||
| * No Main Cap seals available for Continental engines - must use silicone in place of the seals | ||||||||||
| TO20 gas | Z120 gas | InFrame = | HOK-CONT120IF | 440.00 | ||||||
| 3.25" overbore | Major = | HOK-CONT120M | 448.00 | |||||||
| * No Main Cap seals available for Continental engines - must use silicone in place of the seals | ||||||||||
| Massey Harris 22 & 23 | F140 gas | InFrame = | HOK-CONT140IF | 480.00 | ||||||
| 3.1875" bore | Major = | HOK-CONT140M | 510.00 | |||||||
| * No Main Cap seals available for Continental engines - must use silicone in place of the seals | ||||||||||
| TO30 gas | Z129 gas | InFrame = | HOK-CONT129IF | 434.00 | ||||||
| 3.375" overbore | Major = | HOK-CONT129M | 454.00 | |||||||
| * No Main Cap seals available for Continental engines - must use silicone in place of the seals | ||||||||||
| Massey Harris 30 gas | F162 gas | InFrame = | HOK-CONT162IF | 411.00 | ||||||
| 3.1875" bore | Major = | HOK-CONT162M | 437.00 | |||||||
| * No Main Cap seals available for Continental engines - must use silicone in place of the seals | ||||||||||
| TO35, TO40 | Z134 gas | InFrame = | HOK-CONT134IF | 411.00 | ||||||
| 3.375" overbore | Major = | HOK-CONT134M | 438.00 | |||||||
| * No Main Cap seals available for Continental engines - must use silicone in place of the seals | ||||||||||
| Massey Harris 44 gas | H260 gas | InFrame = | HOK-CONT260IF | 695.00 | ||||||
| 3.875" bore | Major = | HOK-CONT260M | 810.00 | |||||||
| * No Main Cap seals available for Continental engines - must use silicone in place of the seals | ||||||||||
| 20, 40, 135, 150 gas | G152 gas | InFrame = | HOK-PER152GIF | 378.00 | ||||||
| Perkins gas | 3.60" bore | Major = | HOK-PER152GM | 400.00 | ||||||
| Premium = | HOK-PER152GP | 508.00 | ||||||||
| 20, 40, 135, 150, 230, | D152 diesel | InFrame = | HOK-PER152DIF | 334.00 | ||||||
| 235, 240, 245, 250 diesel | 3.60" bore | Major = | HOK-PER152DM | 345.00 | ||||||
| direct injection: | combustion bowl pistons | Premium = | HOK-PER152DP | 411.00 | ||||||
| injectors are at an angle | Need valve "degree" for Premium kits (30 or 45 degree valves) | |||||||||
| in the head | ||||||||||
| * Lip or Rope Seal Crank? * | ||||||||||
| 35, 50 gas | Z134 gas | InFrame = | HOK-CONT134IF | 411.00 | ||||||
| 3.375" overbore | Major = | HOK-CONT134M | 438.00 | |||||||
| * No Main Cap seals available for Continental engines - must use silicone in place of the seals | ||||||||||
| 35, 50 diesel | 152 diesel | InFrame = | HOK-PER152NIF | 334.00 | ||||||
| indirect injection: | 3.60" bore | Major = | HOK-PER152NM | 360.00 | ||||||
| injectors are straight | flat top pistons | Premium = | HOK-PER152NP | 389.00 | ||||||
| up & down in the head | ||||||||||
| * Lip or Rope Seal Crank? * | ||||||||||
| 30, 65, 165, 302, 304, | D203 diesel | InFrame = | HOK-PER203DIF | 389.00 | ||||||
| 3165 diesel | 3.60" bore | Major = | HOK-PER203DM | 400.00 | ||||||
| * For 165, need Sleeve | combustion bowl pistons | Premium = | HOK-PER203DP | 465.00 | ||||||
| Flange thickness | Need valve "degree" for Premuim kits (30 or 45 degree valves) | |||||||||
| Advise if Direct or InDirect Injection | ||||||||||
| * Lip or Rope Seal Crank? * | ||||||||||
| 65, 165, 3165 gas | G176 gas | InFrame = | HOK-CONT176IF | 547.00 | ||||||
| Continental gas | 3.655" overbore | Major = | HOK-CONT176M | 563.00 | ||||||
| * No Main Cap seals available for Continental engines - must use silicone in place of the seals | ||||||||||
| 90, Super 90 diesel | 300 diesel | InFrame = | HOK-PER300IF | NLA | ||||||
| 4.50" bore | Major = | HOK-PER300M | NLA | |||||||
| Premium = | HOK-PER300P | NLA | ||||||||
| 130 diesel | 107 diesel | InFrame = | HOK-PER107IF | 810.00 | ||||||
| 3.11" bore | Major = | HOK-PER107M | 875.00 | |||||||
| Premium = | HOK-PER107P | 950.00 | ||||||||
| 135, 150, 230, 235, 245 gas | Z145 gas | InFrame = | HOK-CONT145IF | 492.00 | ||||||
| Continental Gas | 3.375" bore | Major = | HOK-CONT145M | 504.00 | ||||||
| * No Main Cap seals available for Continental engines - must use silicone in place of the seals | ||||||||||
| 165, 255 gas | G212 | InFrame = | HOK-PER212GIF | 380.00 | ||||||
| Perkins Gas | 3.875" bore | Major = | HOK-PER212GM | 420.00 | ||||||
| ** Pistons are NOT available for these kits ** | Premium = | HOK-PER212GP | 510.00 | |||||||
| 174, 175, 180, 184, 255, | 236 diesel | InFrame = | HOK-PER236DIF | 435.00 | ||||||
| 265, 274, 362, 374, 375, | 3.875" bore | Major = | HOK-PER236DM | 455.00 | ||||||
| 384, 670, 3050 diesel | Premium = | HOK-PER236DP | 495.00 | |||||||
| kits contain flanged sleeves - call for pricing on straight sleeves | ||||||||||
| * Lip or Rope Seal Crank? * | ||||||||||
| 175, 180, 265 gas | G236 gas | InFrame = | HOK-PER236GIF | 508.00 | ||||||
| 3.875" bore | Major = | HOK-PER236GM | 628.00 | |||||||
| Premium = | HOK-PER236GP | 699.00 | ||||||||
| * Lip or Rope Seal Crank? * | ||||||||||
| 194, 275, 283, 290, 294, | 248 diesel | InFrame = | HOK-PER248IF | 443.00 | ||||||
| 383, 390, 394, 690, 3060 diesel | 3.978" bore | Major = | HOK-PER248M | 487.00 | ||||||
| Premium = | HOK-PER248P | 557.00 | ||||||||
| kits contain flanged sleeves - call for pricing on straight sleeves | ||||||||||
| * Lip or Rope Seal Crank? * | ||||||||||
| 318 diesel | InFrame = | HOK-PER318IF | 590.00 | |||||||
| 285, 298, 1080, 1085 diesel | 4.50" bore | Major = | HOK-PER318M | 617.00 | ||||||
| Premium = | HOK-PER318P | 698.00 | ||||||||
| 390T, 393, 398, 698T, | T236 diesel | InFrame = | HOK-PER236TIF | 623.00 | ||||||
| 3070 diesel | 3.875" bore | Major = | HOK-PER236TM | 639.00 | ||||||
| Premium = | HOK-PER236TP | 742.00 | ||||||||
| * Lip or Rope Seal Crank? * | ||||||||||
| 399, 699, 2640, 2675, | 354.4 diesel | InFrame = | HOK-PER3544IF | 579.00 | ||||||
| 3090, 3505 diesel | 3.875" bore | Major = | HOK-PER3544M | 617.00 | ||||||
| Premium = | HOK-PER3544P | 764.00 | ||||||||
| * Lip or Rope Seal Crank? * | ||||||||||
| 354.1 diesel | InFrame = | HOK-PER354MIF | 699.00 | |||||||
| 1100 diesel | 3.875" bore | Major = | HOK-PER354MM | 726.00 | ||||||
| Premium = | HOK-PER354MP | 835.00 | ||||||||
| * Lip or Rope Seal Crank? * | ||||||||||
| 1105, 1130, 1135 | T354.1 diesel | InFrame = | HOK-PER354TMIF | 715.00 | ||||||
| 3.875" bore | Major = | HOK-PER354TMM | 742.00 | |||||||
| Premium = | HOK-PER354TMP | 862.00 | ||||||||
| * Lip or Rope Seal Crank? * | ||||||||||
| 1150 diesel | 510 diesel | InFrame = | HOK-PER510IF | CALL | ||||||
| 4.25" bore | Major = | HOK-PER510M | FOR | |||||||
| Premium = | HOK-PER510P | PRICING | ||||||||
| 1155, 2745 | 540 diesel | InFrame = | HOK-PER540IF | 1,480.00 | ||||||
| 4.25" bore | Major = | HOK-PER540M | 1,600.00 | |||||||
| Premium = | HOK-PER540P | 2,125.00 | ||||||||
| 2705, 3525, 3545 | T354.4 diesel | InFrame = | HOK-PER3544TIF | 745.00 | ||||||
| 3630, 3650 diesel | 3.875" bore | Major = | HOK-PER3544TM | 795.00 | ||||||
| 760 Combine | Premium = | HOK-PER3544TP | 895.00 | |||||||
| 3120, 4263, 6170 diesel | 1006.6 diesel | InFrame = | HOK-PER365IF | 746.00 | ||||||
| 3.937" bore | Major = | HOK-PER365M | 795.00 | |||||||
| Premium = | HOK-PER365P | 895.00 | ||||||||
| 3120T, 3140, 3660, 4270, | T1006.6 | |||||||||
| 6180, 8120 diesel | 3.937" bore | |||||||||
| ENGINE S/N <557,976 | InFrame = | HOK-PER365TIFA | 900.00 | |||||||
| Major = | HOK-PER365TMA | 950.00 | ||||||||
| Premium = | HOK-PER365TPA | 1,050.00 | ||||||||
| ENGINE S/N >557,976 | InFrame = | HOK-PER365TIFB | 900.00 | |||||||
| Major = | HOK-PER365TMB | 950.00 | ||||||||
| Premium = | HOK-PER365TPB | 1,050.00 | ||||||||
| 4225, 4235, 6150 diesel | 1004.4 diesel | InFrame = | HOK-PER244IF | 555.00 | ||||||
| 3.937" bore | Major = | HOK-PER244M | 610.00 | |||||||
| Premium = | HOK-PER244P | 690.00 | ||||||||
| 4243, 4245, 4253, | T1004.4 diesel | |||||||||
| 4255 Diesel | 3.937" bore | |||||||||
| Eng S/N <608,300 | InFrame = | HOK-PER244TIFA | 575.00 | |||||||
| Major = | HOK-PER244TMA | 700.00 | ||||||||
| Premium = | HOK-PER244TPA | 800.00 | ||||||||
| Eng S/N >608,300 | InFrame = | HOK-PER244TIFB | 575.00 | |||||||
| Major = | HOK-PER244TMB | 700.00 | ||||||||
| Premium = | HOK-PER244TPB | 800.00 | ||||||||
| 903 diesel | InFrame = | HOK-CUM903IF | 1,755.00 | |||||||
| 4800, 4840, 4880 diesel | Cummins Diesel | Major = | HOK-CUM903M | 1,875.00 | ||||||
| 5.50" bore | ||||||||||